Short answer
Commonly cited times at 15 psi are roughly 60 to 90 minutes for grain jars, around two to two and a half hours for supplemented sawdust blocks (sometimes up to three hours for large bags), and a shorter time for small volumes of agar medium. These figures are rules of thumb from growers, not guarantees. The right time depends on your equipment, the size of the containers and how full the cooker is, so use them as a starting point and follow the instructions for your own pressure cooker and containers.
Why time and pressure matter
Boiling water reaches only about 212°F (100°C), which is not hot enough to kill the heat-resistant bacterial spores that often survive in grain and sawdust. A pressure cooker raises the temperature inside, and at around 15 psi, steam reaches roughly 250°F (about 121°C). Sterilization needs enough time at that temperature for the heat to reach the center of every jar or bag, and dense or large containers take longer to heat through.
Sterilization is different from pasteurization. Nutrient-rich materials like grain and supplemented sawdust are sterilized. Low-nutrient bulk materials like straw are usually pasteurized instead. See how to pasteurize straw.
Typical times
Grain jars (rye, wheat, millet, brown rice). Many growers use about 60 to 90 minutes at 15 psi for quart jars. Larger jars, fuller loads or bags of grain often need longer. For rice-specific prep, see growing mushrooms on rice.
Supplemented sawdust blocks and bags. Dense blocks hold heat and need longer, and about 2 to 2.5 hours at 15 psi is a commonly shared range, with some growers going to 3 hours for large bags. An example recipe is Master’s Mix.
Agar medium. Small volumes, such as a bottle of agar solution, are often sterilized for a shorter period. A recipe shared by one grower used about 45 minutes at 15 psi for a liter-sized bottle. See what type of agar is best.
Other numbers may be recommended for your equipment. Where there is a conflict, trust the maker’s guidance for the cooker and the supplier’s guidance for the bags.
Counting the time
Start the timer when the cooker has reached the target pressure and is holding steady, not when you first turn on the heat. If pressure drops, restart or extend the time. Allow the cooker to come up to pressure gradually, and let steam vent steadily for the period your manual recommends before closing the vent, so the air is purged and the interior reaches the right temperature. A pressure cooker’s gauge and weights should be accurate, so check them periodically.
If you live at high altitude, the pressure you need to reach the right temperature may differ. Check your cooker’s instructions.
Safety
Pressure cookers are safe when they are used according to instructions, but they can cause serious injuries when misused. Keep these points in mind:
- Use a cooker designed for canning or sterilization, with a working gauge or weight and a working pressure-release valve.
- Do not overfill, and do not block the vent.
- Follow the manufacturer’s instructions on water level, heat source and the correct way to release pressure.
- Never open the lid until the pressure has dropped fully and the manual says it is safe.
- Be careful with steam and hot glass, and keep children away.
Do not use a standard electric multicooker for sterilization unless the manufacturer says that it is suitable, since some do not reach or hold true pressure.
Cooling and handling
Let the cooker cool and depressurize naturally. Opening it too soon can cause jars to crack or boil over. Let jars and bags cool to room temperature before inoculating, since heat can kill the mycelium. Keep sealed containers in clean air as they cool, so that contaminants are not drawn in through filters.
Signs of under-sterilization
If many jars or bags show bacterial slime, a sour smell or mold within days of inoculation, the problem may be inadequate sterilization time, wet grain or overloading the cooker. Contamination can also come from poor technique during inoculation; see whether you need a still air box. Adjust one variable at a time and keep notes. For related issues, see what helps mycelium grow faster and mushroom spawn explained.