What you are actually growing
A mushroom is the fruiting body of a fungus, a bit like an apple on a tree. The main body of the fungus is mycelium, a network of fine white threads (see mushrooms and mycelium) that spreads through a food source and breaks it down. When growing mushrooms you are not planting a seed. You are giving mycelium a food source (the substrate), letting it spread, and then changing the conditions so it produces mushrooms.
A few terms come up constantly:
- Substrate: the material the fungus feeds on, such as straw, hardwood sawdust, wood chips, coco coir or compost.
- Spawn: mycelium already growing on grain, sawdust or small wooden plugs. It works like a starter culture, and it is not the same as spores. Types of spawn are explained in mushroom spawn explained.
- Inoculation: mixing or placing spawn into substrate.
- Colonization: the mycelium spreading through the substrate.
- Fruiting: the phase where mushrooms form, usually triggered by fresh air, higher humidity and often a drop in temperature.
- Flush: one wave of mushrooms. After harvest, many setups rest and then fruit again.
Choose a growing method
There is no single correct way to start. The main options trade effort, cost and control against each other.
| Method | Effort | Best for |
|---|---|---|
| Ready-to-fruit kit | Very low | A first harvest and learning what fruiting looks like |
| Bucket or bag with pasteurized straw | Low to moderate | Oyster mushrooms without much equipment |
| Monotub or grow tent with grain spawn | Moderate to high | Bigger yields and repeat grows |
| Logs | Low effort, long wait | Shiitake and other wood-loving species outdoors |
| Outdoor beds in straw or wood chips | Low | Wine cap and oyster mushrooms in a garden |
Most beginner guides, including those from spawn suppliers and gardening sites, suggest starting with a kit. It arrives already colonized, so you only manage the fruiting stage. Kits tend to cost more per pound of mushrooms than other methods, but they let you see the process before you invest in anything else. For a breakdown of what each route costs, see how much it costs to start growing mushrooms at home.
Choose a beginner-friendly species
Species choice affects almost everything else: substrate, temperature, timing and difficulty. For a wider survey, see gourmet mushrooms to grow at home.
- Oyster mushrooms (blue, pink, golden and others) are widely considered the most forgiving. See growing oyster mushrooms. They colonize aggressively, grow on a range of materials such as straw, sawdust and cardboard, and fruit quickly.
- Lion’s mane is often suggested as a good second species (how to grow lion’s mane). It generally prefers supplemented hardwood sawdust and somewhat cooler conditions.
- Shiitake is traditionally grown on hardwood logs and can fruit for several years, but the first harvest can take many months. Sawdust blocks fruit faster indoors.
- Wine cap (king stropharia) suits outdoor beds of wood chips or straw.
Some mushrooms are much harder than these. If you are wondering where the difficulty ceiling is, read what the most difficult mushroom to grow is.
The five stages of the process
Almost every method follows the same sequence, whether you are using a bucket, a tub or a log.
Step 1: Prepare the substrate
The substrate has to favor your mushroom over the many other organisms that would also like to eat it. There are two main approaches:
- Pasteurization reduces competitors without eliminating everything. A common approach for straw is holding it in hot water at roughly 160 to 180°F (71 to 82°C) for about an hour. Another is soaking straw in water treated with hydrated lime, which raises the pH. Hydrated lime can burn skin and eyes and irritate the lungs, so use gloves, eye protection and a mask if you try it. Both methods are covered in how to pasteurize straw.
- Sterilization uses a pressure cooker or sterilizer, usually around 15 psi, and is used for grain and for supplemented sawdust. It is more thorough but requires more equipment. Timings are in how long to pressure cook substrate and grain jars.
Aggressive species such as oysters tolerate pasteurized straw. Slower or fussier species usually need sterilized, supplemented substrates. Whichever you choose, the substrate should be moist but not dripping, roughly like a wrung-out sponge.
Outdoor methods such as logs and straw beds skip sterilization but depend on fresh material. Freshly cut hardwood logs, inoculated within a few weeks of cutting, are the usual recommendation, because older wood may already be colonized by wild fungi.
Step 2: Get spawn and inoculate
Buy spawn from a reputable supplier rather than trying to start from spores. Spores must germinate and find compatible partners first, which takes longer and is harder to control. Mycelium-based spawn is far more predictable.
Mix the spawn through cooled substrate, or layer it in. A higher proportion of spawn gives the mycelium a head start and leaves less room for contaminants. Work with clean hands, a wiped-down surface and a container that has been cleaned. For logs, drill holes, insert plug or sawdust spawn and seal the holes with wax.
Step 3: Colonization
Colonization is the quiet stage. Keep the container closed or lightly vented, out of direct sunlight, and at a steady, moderate room temperature. Most guides suggest roughly 65 to 75°F (18 to 24°C), though species vary. Colonizing material produces its own heat, so the inside of a bag or tub can run warmer than the room. If you want to know when heat becomes a problem, see what temperature kills mycelium.
Colonization commonly takes two to four weeks for fast species on straw or sawdust, and much longer for logs. See colonization timelines by species. Resist opening the container to check on it. Each opening admits mold spores. Look through the sides instead. Healthy mycelium is white and fuzzy or thread-like, and it smells fresh and earthy.
Step 4: Fruiting
Once the substrate is fully colonized (when to fruit a mushroom bag covers how to tell), change the conditions to signal that it is time to fruit: more fresh air, higher humidity, often a cooler temperature and some indirect light. Mushrooms do not need sunlight for energy, but light helps many species form normal caps.
Typical targets are humidity in the 80s to 90s percent and plenty of fresh air. The balance of temperature, humidity, light and air is covered in mushroom growing conditions. Mist the air and container walls rather than soaking the mushrooms themselves.
Step 5: Harvest and later flushes
Harvest when the caps are fully formed but before the edges flatten or turn upward and begin dropping spores. For oyster mushrooms that is when the cap edges are still slightly curled under. Twist or cut the cluster at the base.
After the first flush, many blocks can fruit again. Rehydrating by soaking in cold water for several hours often helps, and each later flush is usually smaller. See mushroom flushes explained. How long all this takes depends on species and method, as explained in how fast mushrooms grow. Spent blocks can usually go into compost or be used to inoculate outdoor beds.
Basic equipment checklist
For a kit you need little more than a spray bottle. For a DIY indoor grow, a typical list includes:
- Spawn and substrate suited to your species
- A container such as a bucket, bag or storage tub with ventilation (options are compared in mushroom growing chambers)
- A thermometer and hygrometer
- A spray bottle
- Rubbing alcohol and gloves for cleanliness
- A pressure cooker if you plan to sterilize grain or sawdust
Common problems and what they usually mean
- Green, black or pink patches: usually contamination. See what to do about green mold on substrate.
- Long, thin stems and small caps: often too little fresh air.
- Dry, cracked caps or no pins: often too little humidity. See why mushrooms won’t pin.
- Sour or rotten smell: usually bacterial contamination, so discard the batch.
- Nothing happens for weeks: check temperature, spawn quality and whether the substrate was too dry or too wet.
Cost, timing and what comes next
Timelines vary a lot. A kit can produce mushrooms within one to two weeks of opening. A DIY indoor grow commonly takes several weeks from inoculation to harvest, and logs can take most of a year or longer. If you are planning outdoor projects, the time of year you plant makes a real difference.
Some people ask whether they can start from a mushroom bought at the grocery store, and sometimes this works. See growing mushrooms from store-bought mushrooms. And if your hobby grows into more than you can eat, starting a small mushroom farm covers what changes at larger scale.