Short answer
There is no single number, because it depends on the species, how long the heat lasts and how the mycelium is housed. As a rough guide for common cultivated mushrooms:
- Growth tends to slow or stall once temperatures climb into the high 80s°F (around 30°C).
- Prolonged exposure above roughly 95 to 100°F (35 to 38°C) is risky for many species.
- Many species are damaged or killed somewhere around 105 to 110°F (about 40 to 43°C), especially if held there for hours.
- Pasteurization temperatures, commonly 160°F (71°C) or higher, kill active mycelium quickly.
Treat these as approximate. Reports from growers differ, and tropical species such as pink oyster tolerate more heat than cool-weather species such as king oyster or enoki.
Stress versus death: why exposure time matters
Heat damage is a matter of degree and duration. A brief warm spell may only slow growth. A long one can kill the colony. Several things shape the outcome:
- Duration: a short spike can be survivable where hours at the same temperature are not. Some growers report mycelium recovering from brief overheating, but this is not reliable.
- Species: colonies adapted to warm climates handle more heat than those from cool forests.
- Condition of the colony: a well-established, healthy colony generally copes better than a young, thin one.
- Moisture: very wet substrates hold heat and also favor bacteria.
Approximate temperature ranges
| Range | What usually happens |
|---|---|
| About 65 to 78°F (18 to 26°C) | Comfortable colonization range for many common species |
| About 78 to 86°F (26 to 30°C) | Faster at first, but growth may slow and contamination risk rises |
| About 86 to 95°F (30 to 35°C) | Stress, stalled growth, increased contamination |
| About 95 to 105°F (35 to 40°C) | Possible damage with prolonged exposure |
| About 105 to 110°F (40 to 43°C) and above | Mycelium of many species dies, especially with hours of exposure |
| 160°F (71°C) and above | Used in pasteurization; kills active mycelium |
Check the guidance for your specific species. Cool-weather species can be stressed at the low end of these ranges, while tropical species may do fine in the warmer middle.
Why heat builds up inside the substrate
Actively colonizing substrate generates heat as the mycelium metabolizes it. Large bags, dense blocks and tightly packed bulk substrate can run several degrees warmer than the room, and the center is the warmest part. In a closed tub or bag with little airflow, the heat does not escape easily.
This means the air temperature is not always the number that matters. If a block feels warm to the touch, the mycelium inside may be in trouble even though the thermometer on the wall reads normal. A probe thermometer placed in or against the substrate gives a truer reading. This is one reason guidelines for mushroom growing conditions suggest keeping the room cooler than the temperature you ultimately want in the substrate.
Signs of heat damage
- Mycelium that stops expanding or retreats, or turns yellow or brownish.
- Wet, slimy, sour-smelling patches, which usually mean bacteria took over after the mycelium weakened.
- Mold appearing in a block that was colonizing well. Heat favors competing organisms. See green mold on mushroom substrate.
- Pins that form but stop or abort in hot rooms.
What to do if your grow got too hot
- Move the container to a cooler place right away, and increase airflow with a fan, an open window or air conditioning.
- Spread out or loosen very dense bulk substrate if you can do so without exposing it to contamination.
- Check the substrate temperature with a probe, not just the room.
- Wait and watch. If the mycelium is still white and active after the temperature returns to normal, it may continue. If it is discolored, wet or smells sour, discard it.
- Avoid stacking bags or blocks tightly during colonization, and leave space between them. See what an incubation chamber is.
In summer, a cooler room, a basement or air conditioning may be needed. In very hot climates, timing your grows for cooler months helps. For outdoor beds, shade and moisture help. Planting windows are discussed in what time of year to plant mushroom spawn.
What about cold?
Cold is less dangerous to most mycelium than heat. Many cultivated species, especially those grown outdoors on logs and beds, survive cold winters in a dormant state. Growth simply slows or stops. Some tropical species, such as pink oyster, are more sensitive to cold. A moderate cold snap rarely kills established mycelium, but check the guidance for your species and protect young outdoor beds from hard freezes with mulch.
Using heat on purpose: pasteurization and sterilization
The same lethal effect of heat is useful for preparing substrate. Pasteurizing straw, commonly at around 160 to 180°F (71 to 82°C) for about an hour, reduces competing organisms while leaving some beneficial microbes (how to pasteurize straw). Pressure sterilizing, often at around 15 psi for a longer time, is used for grain and supplemented sawdust (how long to pressure cook substrate and grain jars). The role of each method in the overall workflow is covered in how to grow mushrooms at home. Always let treated substrate cool fully before adding spawn, or you will kill your own culture.