Getting Started

How Much Does It Cost to Start Growing Mushrooms at Home?

A realistic look at what it costs to start growing mushrooms at home, from a $20-$40 kit to bucket, monotub and log setups, plus ways to keep costs down.

On this page
  1. Short answer
  2. Cost by method
  3. Ready-to-fruit kits
  4. Bucket and bag methods
  5. Monotub or tent setup
  6. Outdoor beds and logs
  7. Costs people forget
  8. Is it cheaper than buying mushrooms?
  9. Ways to reduce costs
  10. Choosing a budget path

Short answer

You can start growing mushrooms for roughly $20 to $40 with a ready-to-fruit kit, or for somewhere around $30 to $60 with a very simple do-it-yourself method. A fuller indoor setup with a pressure cooker, containers and spawn often runs a few hundred dollars, and an elaborate tent with automated humidity and air control can reach several hundred dollars more. Outdoor methods can be inexpensive, but logs take time. The figures below are approximate US prices from spawn suppliers and growers and will vary by region and by season.

Cost by method

Method Typical startup cost Notes
Ready-to-fruit kit About $20 to $40 Little to no equipment; one to a few flushes
Simple DIY (rice or grain bags, straw) About $30 to $60 Basic supplies; more risk of contamination
Bucket or bag with pasteurized straw About $20 to $50 plus spawn Needs a bucket, straw and spawn
Monotub with a pressure cooker About $100 to $200 More upfront, lower cost per batch
Tent setup with automation Several hundred dollars; one example totaled nearly $800 Convenience and consistency, not necessity
Outdoor bed (straw or wood chips) About $50 or less Spawn and substrate; spawn bags often $20 to $40
Logs Roughly $80 to $200 Plug spawn, drill and wax; logs may be free or cheap

Ready-to-fruit kits

Kits arrive colonized and ready to fruit, so you mainly need a spray bottle and a spot with indirect light. Prices are usually in the $20 to $40 range. They are the simplest route and let you see the whole fruiting process, but they are typically the most expensive way to grow per pound of mushrooms, and they often give one to three flushes. Many people buy a kit first, then reuse the spent block outdoors in a bed or compost. If you want to understand what happens after you open the box, how to grow mushrooms at home walks through the full process.

Bucket and bag methods

These use pasteurized straw or sawdust and bought spawn in a bucket, bag or tub. Costs are mostly the spawn, a container and a way to pasteurize, which may be a large pot or a barrel with hot water, or a soak in hydrated lime water. Some growers keep the total very low, though this often means accepting more risk of contamination. A typical build is described in growing mushrooms in a 5 gallon bucket. Using lime requires gloves, eye protection and a mask, because it can burn skin and eyes.

Monotub or tent setup

A monotub setup typically adds a pressure cooker or sterilizer, jars or bags for grain, grain, bulk substrate materials, a storage tub, and some tools for clean work. Some growers report spending about $100 to $200, with others spending more. A pressure cooker alone can cost around $100 to $150 or more, depending on size. A more elaborate tent, with humidifier, fans, timers and sensors, can total several hundred dollars. See what you need for a mushroom grow tent. One grower described a setup of nearly $800, though they said they had built it gradually and mostly to avoid daily maintenance. Automated equipment is a convenience, and it is generally not required for a beginner’s first grows. The environment needs are described in mushroom growing conditions.

Outdoor beds and logs

Outdoor methods keep equipment costs low because the environment is already provided.

  • Beds: supplier estimates are around $50 or less to start, mainly for spawn (bags often $20 to $40) plus straw or wood chips, which may be free or cheap. A well-maintained bed can keep producing for several seasons. Growing wine cap in a garden bed is a common example.
  • Logs: a one-time set of tools, fresh logs and plug spawn can cost around $200, and repeat batches might cost around $80 if you reuse tools. Logs can produce for years, but the wait for the first harvest is long, often many months. Sourcing fresh hardwood can be free if you have access to trees, but costs more if you must buy it.

Timing affects results, as described in what time of year to plant mushroom spawn.

Costs people forget

  • Replacement spawn and substrate for each new cycle.
  • Cleaning supplies: rubbing alcohol, gloves, disinfectant, and a mask if you use lime.
  • A thermometer and hygrometer, which are inexpensive and very useful.
  • Heat or cooling: a heat mat in winter, or a fan or air conditioning in summer. See what temperature kills mycelium for why heat control can matter.
  • Electricity for fans, humidifiers and lights.
  • Space, especially if you need to dedicate a closet or room.
  • Failed batches: most beginners lose a batch or two. Budget for it. See green mold on mushroom substrate for a common cause.
  • Your time, which can be significant.

Is it cheaper than buying mushrooms?

It can be, but not at the start. Kits usually yield a modest amount for the price. Beginner guides often estimate that a kit produces a few hundred grams of oyster mushrooms. Bulk methods have lower cost per pound but need more upfront spending, and the savings only appear once you run several batches without major losses. If you mainly want specialty mushrooms that are hard to find or expensive, growing at home can make good sense. If you only want button mushrooms, buying them is often simpler and cheaper.

Ways to reduce costs

  • Start with oyster mushrooms, which are forgiving, and master one method before adding equipment.
  • Reuse spent kit blocks to inoculate outdoor beds or straw instead of buying new spawn.
  • Source free substrate such as clean straw, fresh wood chips or coffee grounds, using material that is fresh and free of treatments.
  • Expand grain spawn into more grain instead of buying new spawn each time, once you are comfortable with sterile technique.
  • Buy a pressure cooker only when you know you will keep going.
  • Keep things clean to avoid wasted batches. Cleanliness is cheaper than replacing blocks.
  • Buy spawn from a reliable supplier. Cheaper spawn that fails is more expensive in the end.

Choosing a budget path

If you are unsure, a kit is a low-risk first purchase, followed by a bucket or straw method on your second grow. Move to a monotub or tent only if you are enjoying it and want larger harvests. If you eventually want to sell what you grow, starting a small mushroom farm looks at the costs and risks at that scale. And if you are tempted to save money by cloning a grocery-store mushroom, growing mushrooms from store-bought mushrooms explains what usually works and what doesn’t.

The complete guide to getting started

How to Grow Mushrooms at Home: The Complete Process
Read the guide

Keep exploring

Guides from other topics

All topics →