Mycology Science

Mushroom-Based Packaging: How Mycelium Materials Are Made

Mushroom packaging uses mycelium to bind farm waste into molded protective inserts. See how it is made, who makes it, its drawbacks, and what it costs.

On this page
  1. What mushroom-based packaging is
  2. How it is made
  3. What it is made of
  4. Where it is used and who makes it
  5. Benefits
  6. Disadvantages
  7. How expensive is mycelium packaging?
  8. Can you make it at home?

What mushroom-based packaging is

Mushroom-based packaging, often called mycelium packaging, is a molded material grown from fungal mycelium and agricultural waste. It is mainly sold as protective inserts and corner blocks in place of expanded polystyrene (EPS, often called Styrofoam) or other plastic foams. Despite the name, it contains no mushrooms to eat. The fungus is used for its mycelium, the web of fine threads that acts like a natural glue (see what mushroom mycelium is good for).

How it is made

Suppliers describe a similar process, with variations in timing:

  1. Mix the ingredients. Plant fibers from agricultural waste are combined with mycelium (or spawn).
  2. Fill a mold. The mix is packed into a mold shaped to fit the product being protected.
  3. Let it grow. In a controlled environment, the mycelium feeds on the plant material and spreads through it, binding the particles into one solid piece. Suppliers describe this stage as taking roughly four to five days.
  4. Finish growing outside the mold. One supplier describes removing the pieces from the mold and leaving them for a further couple of days.
  5. Stop the growth. The pieces are dried or heated in an oven or kiln, which removes moisture and kills the fungus, so it stays inert and does not keep growing or form mushrooms.

The result is a lightweight, foam-like piece. The mycelium here is basically doing the same job as it does in a log or a bag of sawdust, just in a mold instead. For the science of how it spreads, see how fungal hyphae grow.

What it is made of

Typical ingredients are plant waste such as hemp hurds, corn stalks or sawdust, plus mycelium. The fungus species used by commercial producers is often not disclosed in detail. Many wood-decaying (saprotrophic) fungi are suitable because they readily colonize fibrous plant material, a trait they share with the shiitake and oyster mushrooms that home growers use.

Where it is used and who makes it

Companies frequently named include Ecovative (sold under the brand Mushroom® Packaging), Grown.bio and the Magical Mushroom Company. Products are described as protecting items like electronics, cosmetics, wine and furniture parts. Some large brands are reported to have tested or used mycelium inserts, but check the current status of any particular claim, since packaging choices change.

Benefits

Supplier and press descriptions generally highlight:

  • Compostability. Suppliers describe the material as home compostable, with breakdown timescales commonly cited as weeks to a couple of months. These are supplier claims, and real-world results depend on conditions.
  • Made from waste. The raw material is often an agricultural by-product.
  • Custom shapes. Because it is grown in a mold, it can match a product closely.
  • Fire and heat behavior. Suppliers describe it as insulating and fire-resistant, though performance varies by product.

Disadvantages

  • Cost and lead time. Growing takes days instead of the seconds it takes to mold foam, and custom tooling has to be made first.
  • Moisture. It is a natural fiber product, so protection from prolonged wet conditions can matter.
  • Weight and bulk. Some designs are heavier or thicker than the foam they replace.
  • Scale. Production runs are typically smaller than for conventional foam, so supply can be limited.
  • Customer expectations. Buyers need to know how to dispose of it, and “compostable” claims depend on local facilities and conditions.

How expensive is mycelium packaging?

It is generally more expensive per unit than mass-produced EPS, especially for small orders. One supplier’s website listed a flat prototyping fee of about $1,350 for design and samples, and said that durable hard tooling typically costs roughly $2,000 to $9,000 depending on volume. These are one company’s published figures, so treat them as an example rather than a market price. Per-part prices are usually quoted after prototyping.

Can you make it at home?

Hobbyists do experiment with molding grain spawn and sawdust in small molds. It takes clean technique, a way to stop growth by drying or heating, and patience. Results are usually fragile compared to commercial parts. For related fungal materials, see mycelium leather, and for the basics behind these materials, start with our mycology basics.

The complete guide to mycology science

Mycology Basics: The Science of Mushrooms With a Glossary
Read the guide

Keep exploring

Guides from other topics

All topics →